Herrmidifier: Engineered Humidification Systems


Dual Pneumatic • Herrtronic • Herrmidicool® • Ecotec
Herricane® • Herrdraulic™ • Herrmidisteam®
Commercial Products
Herricane CS Series Steam Distribution System H E R R I C A N E®
Steam Distribution Systems
Quiet, Solid Reliability

Product Series
Series CS 1000 Series CS 2000 Series CS 3000 Series CS 4000
Series CS 4000

Series CS 4000 Vertical Distribution Pipe, Multi-Tube HumidifierVERTICAL DISTRIBUTION PIPE, MULTI-TUBE HUMIDIFIER

  • Capacities to 1600 lbs*/hr (727 kg/hr)
  • Custom nozzle/manifold configuration yields even distribution
  • Units available for pressurized and atmospheric steam supplies
  • Manifold lengths to 10' (3.1 m)
  • Grid height to 8' (2.4 m)
  • Total stainless steel construction
  • Consult factory for larger applications




INSTALLATION NOTES

1. CS-4111 - CUT 2" WIDE x ("X" MINUS 4") RECTANGULAR OPENING IN DUCT AT DESIRED LOCATION.

CS-4116 - CUT 3" WIDE x ("X" MINUS 4") RECTANGULAR OPENING DUCT AT DESIRED LOCATION.

2. APPLY BEAD OF BUTYL RUBBER CAULK OR EQUAL AROUND OPENING IF DESIRED.

3. INSERT DISTRIBUTION TUBES IN OPENING WITH CONDENSATE PORT FACING "DOWN".
INSTALL HEADER SO THAT IT IS PLUMB OR HAS A MAXIMUM SLOPE OF 1/16" PER FOOT TOWARDS DRAIN.

4. FASTEN SUPPLY HEADER TO DUCTWORK WITH (6) CS-163 DRILL QUIKS (INCLUDED) AND THREADED ROD AS SHOWN. THREADED ROD MUST SUPPORT UNIT WEIGHT. USE DRILL QUIKS FOR LOCATING ONLY.

5. APPROXIMATE UNIT WEIGHT (IN LBS.) CS-4111 = (4.64 x HEADER LENGTH [IN FEET]) + (0.93 x LENGTH OF DISTRIBUTION TUBE [IN FEET]) + (0.93 x LENGTH OF DISTRIBUTION TUBE [IN FEET] x NUMBER OF TUBES)
CS-4116 = (6.28 x HEADER LENGTH [IN FEET] + (1.70 x LENGTH OF DISTRIBUTION TUBE [IN FEET] x NUMBER OF TUBES)

6. CONSULT FACTORY IF OTHER MOUNTING ARRANGEMENTS ARE NECESSARY.