| 1 |
Manifolds,
header, and nozzles are all stainless steel material. |
| 2 |
Manifold
trap required on CS-2000, CS-3000 and CS-4000 series units.
Trap not required on CS-1000 series units. |
| 3 |
CS-58
collection header may be used to connect a dual outlet steam
tank to a single 2" hose or tube for connection to a
distribution system. |
| 4 |
MDD units
require a separate distribution system for each cylinder.
|
| 5 |
Exact
number of steam distributor tubes may vary. |
| 6 |
Exact
number of steam nozzles per distributor tube may vary. |
| 7 |
Duct
static pressure: 5" H20 |
| 8 |
Air Velocity:
<2000 fpm |
| 9 |
Steam
outlets on steam cylinder are 1 1/2" O.D. Recommended
supply lines are 1 1/2" Insulated Type L Copper Pipe
with 1 1/2" Hose cuffs for single steam outlet (units
to 50 lbs/hr) and 2" I.D. insulated copper pipe for two
outlet units (units with capacity from 51-100 lbs/hr) |
| 10 |
Unit
shown with CS-1101. Other CS Series may also be used.
|
| 11 |
Plumbing
from unit to steam distribution system provided by others.
|
| |
