 |
 |
If
you do not have Adobe Acrobat Reader, you may click the button to
the left to download it. Once you have the PDF open, if you wish to
save the document you may do so by going to the File menu and selecting
Save As... |
| |
The 6000 Series Electronic Steam Humidifier is a good choice for
those smaller applications where the demand for clean steam and
the performance of Herrmidifier's tried and true electronic steam
technology is required. This unit has a maximum output of 8 lbs/hr.,
runs on 208-240 VAC single phase power and is U.L. and C.S.A.
listed. The unit is available as a ducted version complete with
control, distributor, and steam hose, or as a self-contained blower
package for distribution of steam right into the space. Controls
are on/off and included in either package.
|
| Features |
- The Purity
Of Steam Humidification
- UL/CSA Certified
- Built-in
Blower & Humidistat (Blower Models)
- Remote Steam
Pipe And Controls (Remote Models)
- Power &
Service Panel Indicators
- Attractive,
Neutral Finish
- Hidden Pipe
& Wire Routing
- Easy Maintenance
& Steam Cylinder Replacement
- 2-Year Warranty
(Excludes Replaceable Steam Cylinder)
- Made in
the USA
Herrmidifier's
6000 Series Electronic Steam Humidifiers combine the purity of steam
humidification with the precision of electronic monitoring and control.
Exclusive circuitry continuously monitors the mineral content of water
to provide optimum performance and trouble-free operation.
The wall-mounted
6000 Series features a cleanly designed, neutral-colored cabinet
which allows pipe and wire routing to be concealed. Operation is
controlled by a humidistat(s). The easy-access cover makes maintenance
and steam cylinder replacement a snap.
6000 Series
units can be packaged to meet the requirements of many different
application configurations. Each package comes complete with all
components needed for installation.
Herrmidifier's
6000 is the proven solution for any large residential or light commercial/industrial
application which requires precision air quality control.
|
| Applications |
- Large Homes
- Computer
Rooms
- Laboratories
- Clean Rooms
- Offices
- Paper Storage
& Handling
- Clinics/Medical
Offices
- Resort Homes
& Condos
|
| Specifications |
|
Part
1 Scope |
|
|
| PART
1 SCOPE
Herrmidfier
shall:
[Go
to top of section]
- Furnish a
system of humidification for the areas known as ______________________.
- Operation
of the system shall be controlled automatically to maintain _____%R.H.
at ____°F with a tolerance of ±_____%R.H.
- Warrant the
system for a period of two years from date of shipment (except
for the replaceable steam cylinder).
- Provide (1)
owner's manual to cover installation, startup, operation and maintenance.
PART
2 PRODUCT
[Go
to top of section]
- Furnish ____self-contained
electrode steam humidifier(s) with a capacity of ____lbs./hr.
with a power supply of ____V/Ph/Hz. The humidifier shall be capable
of operating on water of 60-1000 micromho. The equipment shall
be supplied per the schedule on the drawings. The humidifier shall
be Model 6000-___ as manufactured by Herrmidifier.
- Units shall
have a replaceable sealed steam cylinder with zinc plated electrodes
with a published cylinder life based on incoming water conductivity.
- Water make-up
system shall include inlet strainer, solenoid valve with flow
regulator, and fill tee with built-in air gap to prevent back
siphoning.
- Drain system
shall consist of a silent operating DC valve, with shielded core
dry operator, and integral air gap to comply with state and municipal
codes.
- Steam distribution
system shall be:
- Integral
housed blower to discharge steam directly into room without
mineral dust carryover. Units shall have integral air proving
switch and time-delay included to ensure proper distribution
of steam.
OR
- Ducted
application shall distribute steam via a stainless steel distribution
pipe constructed to allow application in horizontal or vertical
mounting position. Steam pipe shall be built with an integral
pitch to allow any condensate to drain back to the cylinder.
- Unit shall
include solid state control switch which automatically adapts
to incoming water to optimize operation of the steam cylinder.
Control shall sense high water level via a probe and modify operation
when this level is reached. Control shall provide drain tempering
by mixing cool fill water with hot drain water to allow use of
PVC drain lines. Fault conditions detected by control shall be
"overcurrent," "fill system," and "end
of cylinder life."
- Circuitry
shall include "capacity adjustment" potentiometer to
allow capacity to be adjusted from 50-100% of factory set maximum.
- Indicator
lights shall include "Power On," "Cylinder Full,"
and "Service."
- Unit shall
have a cover interlock safety switch.
- Enclosure
to be 18 gauge powder coated steel, contoured to conceal all service
piping connections.
- The humidifier
shall be controlled by a 24 VAC on/off humidistat. Blower version
shall have integral humidistat and air proving switch. Ducted
versions shall have remote mounted control and high limit humidistats
and air proving switch.
- The humidifier
shall have a built-in contractor to break power to all electrodes
when humidity level is satisfied.
- The unit
shall be UL and CUL listed.
PART
3 EXECUTION
[Go
to top of section]
- The humidifier
shall be wall mounted. The installation shall be in accordance
with the manufacturer's instructions. Special consideration must
be given to clearances to ensure adequate space for absorption
of vapor into the room or duct, whichever may apply.
- Provide water
supply within pressure and conductivity criteria. Softened water
is acceptable.
- Provide unit
drain.
- All wiring
shall be in accordance with applicable sections of national, state,
and local electrical codes. The contractor shall provide and install
external overcurrent protection and install system wiring in accordance
with the manufacturer's requirements.
Herrtronic 6000 Systems are manufactured by Herrmidifier,
Trion Inc., 101 McNeill Road Sanford, NC 27330 |
|
 |
